A lesson from The Forge
Sharpening a chisel until it shaves
A blunt chisel is more dangerous than a sharp one — you push harder and it slips. Twenty minutes, three grits, no jigs.
Step 1
Flatten the back
The back of the chisel is half the edge. Rub it flat on your coarsest stone until the scratches run all the way to the tip. You do this properly once in the tool's life, so do it properly.
Step 2
Work the bevel
Bevel flat on the stone, lift a hair, and push in steady strokes until you can feel a burr of metal folded over the back edge. Same count of strokes on each grit, coarse to fine.
Step 3
Chase the burr off
Back flat on the fine stone, one light pass. Bevel, one light pass. Again, lighter, until the burr is gone. It should shave hair off your arm. If it doesn't, the burr's still there.